Asus GigaX2124X - Manual (Page 75)

GigaX Series L2 Managed Switch User Guide
75
Port Priority (0..255):[old port Priority]
Port Path Cost (1..65535):[old port Path Cost] Path Cost>
Port EdgePort (yes/no):[old port EdgePort] EdgePort >
Port Point-to-Point (yes/no/auto):[old port Point-to-Point]
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 stp retrieve
CLI command : l2 stp bridge retrieve
CLI command : l2 stp port retrieve
[Show Trunk]
Displays a specific trunk group settings. User can create a new trunk group by
specify a unique trunk ID, a trunk name description, the port selection criterion
(rtag), LACP mode (enabled or disable), and its trunk group member ports.
CLI command : l2 trunk show
[rtag]
Sets traffic distribution algorithm (1~3). The “rtag” is the packet distribution
algorithm for the trunk group.
CLI command : l2 trunk rtag <1|2|3>
Rtag values and corresponding meanings:
1: source XOR destination MAC(L2),
2: source XOR destination IP(L3)
3. source XOR destination Port(L4).