Asus GigaX2124X User Manual
Page 24
GigaX Series L2 Managed Switch User’s Guide
24
Default User Name:
Admin
Default Password:
(no password)
You can change the password at any time (see section
5.3.1 System Commands).
3. To setup a new IP address, click “System”, then “IP Setup” (see Figure
8). Fill in the IP address, network mask and default gateway, then click
.
4. If your new address is different from the default, the browser can not
update the switch status window or retrieve any page. This is normal.
You have to retype the new IP address in the address/location box, and
press
5. To enable authentication for Web access, click “Administration” on
the menu list, then select “Enabled” to start the protection.
A login window appears immediately after you click
. See the
figures on the next page.
Figure 7.
IP Setup