Hardware setup – Asus E500-CS User Manual
Page 27
ASUS CUSI-FX User’s Manual
27
3. HARDWARE SETUP
Connectors
3. H/W SETUP
3) Fast-Ethernet Port Connector (RJ45) (optional)
An optional RJ-45 connector is located on top of the USB connectors. The
connector allows the motherboard to connect to a Local Area Network (LAN)
through a network hub.
RJ-45
4) Universal Serial Bus Ports 0 & 1 (Black two 4-pin USB)
Two USB ports are available for connecting USB devices.
Universal Serial Bus (USB)
5) Parallel Port Connector (Burgundy 25-pin PRINTER)
You can enable the parallel port and choose the IRQ through Onboard Parallel
Port (see 4.4.2 I/O Device Configuration).
NOTE: Serial printers must be connected to the serial port.
Parallel (Printer) Port (25-pin female)
LED1
LED2
LED1
LED2
On
Power
Good connection
Off
No power
Bad connection
Blinking
Data transfer