Asus BP1AD - Manual (Page 35)

Configuring the USB ports using the BIOS
You can enable or disable the front and rear USB .0 and USB 3.0 ports from the BIOS
Setup.
To disable or enable the front and rear USB 2.0 and 3.0 ports:
1.
Press to enter the BIOS Setup at startup.
. From the BIOS Setup screen, click Advanced > USB Configuration > USB Single
Port Control.
3. Select the USB port that you want to enable or disable.
4. Press to enable or disable the selected USB port.
5. Click Exit and select Save Changes & Reset to save the changes made.
Refer to Chapter 1 for the locations of the USB ports.
EN
GL
IS
H
EN
GL
IS
H
ASUS BM6AD (MD310), BM1AD, and BP1AD (SD310) 35
EN
GL
IS
H
EN
GL
IS
H