Asus RS120-E4/PA2 - Manual (Page 42)

Chapter 2: Hardware setup 2-26
To reinstall the motherboard:
1. Firmly hold the motherboard by the
sides and insert it into the chassis
as shown.
2. Carefully adjust the motherboard
until the rear panel ports fit in place.
3. Use a Phillips (cross) screwdriver to
secure the motherboard with ten (10)
screws in the holes as shown in the
illustration in the previous section.
4. Reconnect all the required cables to
the motherboard. See section “2.6
Cable connections” for details.
5. Reinstall all the devices that you
have previously removed.