3 initializing the logical drives – Asus RS120-E4/PA2 User Manual

Page 120

6-14

Chapter 6: RAID configuration

6.2.3

Initializing the logical drives

After creating the RAID set(s), you must initialize the logical drives. You may

initialize the logical drives of a RAID set(s) using the

Initialize or Objects

command on the

Management Menu.

Using the Initialize command

To initialize the logical drive using the Initialize command:

1. From the

Management Menu, highlight Initialize, then press .

2. The screen displays the available RAID set(s) and prompts you to select the

logical drive to initialize. Press the to select the logical drive from

the

Logical Drive selection, then press .