Asus PIKE 2108 - Manual (Page 12)

1-4 Chapter 1: Product introduction
3. Secure the extension heatsink with
four screws.
2. Attach the extension heatsink to
ASUS PIKE 2108 SAS RAID card.
1.5 Card installation
Follow the below instructions to install ASUS PIKE 2108 SAS RAID card to your
server system.
For 1U server, install the SAS RAID card to the PIKE RAID card slot on the
motherboard.
It is recommended to install a low-profile form factor PCIe expansion card with
full height bracket, or with low profile bracket to the PCIe riser card to prevent
mechanical interference with the PIKE 2108 card.
For 2U, 5U, or pedestal server, attach the extension heatsink to ASUS PIKE 2108
SAS RAID card, and then install the SAS RAID card to the PIKE RAID card slot on
the motherboard.
Attach the extension heatsink to ASUS PIKE 2108 SAS RAID card
1. Remove the stickers on the back of
the extension heatsink.