Asus Z87-WS - Manual (Page 145)

ASUS Z87-WS 4-15
Chapter 4
4.3.6 USB 3.0 Boost
USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) which
automatically speeds up the transfer rates of your USB storage devices.
To launch USB 3.0 Boost, click USB 3.0 Boost on the AI Suite 3 main menu bar.
Using USB 3.0 Boost
1. Connect a USB 3.0 device to the USB 3.0 port.
2. From the USB 3.0 Boost screen, click to select a USB device.
3. To enable UASP on your USB device, click UASP. To revert to its normal transfer rate,
click Normal.
• Visit the ASUS website at www.asus.com for detailed software configuration.
• Use USB 3.0 devices for better performance. Data transfer speed varies with USB
devices.
Click to select a USB device
Click to enable the USB
device’s normal data
transfer rate
Click to enable UASP or
Turbo Mode to the USB
device for a faster data
transfer rate