Asus GX1026i - Manual (Page 14)

14 GX1026i Smart Ethernet Switch
Port Mirroring
This page enables you to monitor network traffic through setting the destination port
and the source port. To set the destination/source ports, click Port Management >
Port Mirroring.
The source port is the port where all the incoming/outcoming packets are copied
from. The destination port is the port where all the packets will be sent from the
source port.
There are four Port Mirroring methods:
•
Disable: Disable port mirroring
• Rx: The incoming packet of the source port is copied to the destination port.
• Tx: The outgoing packet of the source port is copied to the destination port.
• Tx & Rx: Packets at both directions is copied to the destination port.
Port Mirroring is bandwidth consuming.
To save the settings made on this page, click Update.