En gl is h en gl is h en gl is h en gl is h – Asus CG8480 User Manual

Page 94

Chapter 6: Using the utilities

Recovering.the.partition
This procedure allows you to delete the Intel

Rapid Start Technology from your system, and

recover the partition you made for the Intel Rapid

Start Technology installation.

Run the.Command.Prompt.tool.
Type diskpart and press Enter.

1.
.

The value “x” refers to a disk number where you want to delete the store partition.

Tick On.in the Status field to enable the feature, and click Save.

Click.to.enable.or.

disable.battery.

saving.mode..This.

function.only.applies.

to.notebooks.

Select.and.click.to.enable.

or.disable.the.function

Click.to.enable.or.disable.the.timer..When.enabled,.move.

the.scroll.bar.to.the.desired.time..When.the.system.is.

idle.for.more.than.the.time.period.you.set,.the.system.

automatically.goes.into.the.Intel

.Rapid.Start.mode..

Default.time.is.10.minutes.

Click.to.save.the.

settings.made.

Click.to.cancel.the.

settings.made.

At the diskpart prompt, type

list disk

after DISKPART,

and press Enter.

Select the disk (SSD)

where the Intel

Rapid Start

Technology is installed for

volume recovery, type select

disk x

.(x = number), and

press Enter.