Asus T5-P5G41E - Manual (Page 8)

8 Installation manual
English
Installing an optical drive
1. Place the chassis upright.
. Insert the SATA optical drive to
the upper 5.5 in drive bay, then
carefully push the drive until its
screw holes align with the holes on
the bay.
3. Secure the optical drive with four
screws on both sides of the bay.
4. Connect the SATA signal (4A) and
power plugs (4B) to the connectors
at the back of the SATA drive.
3
Reinstalling the cover
1. Fit the cover tabs with the chassis rail
and the front panel tabs (1A), then
lower the rear edge of the cover as
shown (1B).
. Secure the cover with three screws.
1A
1B
SATA
4A
4B
u5335_T5_series_qsg.indb 8 1/9/10 3:56:09 PM