Asus RT-N12 (VER.B1) - Manual (Page 21)

1 Chapter 3: Configuring the clients RT-N12 B1
Windows ® NT4.0
1. Go to Control Panel > Network to
display the Network setup window
then select the Protocols tab.
. Select TCP/IP Protocol from the
Network Protocols list then click
Properties.
3. From the IP Address tab of the
Microsoft TCP/IP Properties
window, you can:
• Select the type of network
adapter installed in your
system.
• Set the router to assign IP
address automatically.
• Manually set up the IP address,
subnet mask, and default
gateway.