Asus RT-N12 (VER.B1) - Manual (Page 11)

11 Chapter : Setting up the hardware RT-N1 B1
LAN1 LAN2 LAN3 LAN4 Internet
Modem
RT-N12 B1
Client
. Connect your devices.
Setting up the wireless router in Router mode
In the Router mode, the wireless router connects to the Internet via PPPoE,
Automatic IP, PPTP, LTP, or Static IP, and provides you with wireless radio
signals. The NAT, firewall, and IP sharing services for LAN clients are enabled.
To set up the wireless router in Router mode:
1. Choose the Router mode.
Router AP
Repeater
RT-N12 B1
LAN1 LAN2 LAN3 LAN4 Internet
Note: We recommend that you use an Ethernet cable (wired connection) to connect your
computer to the wireless router for initial configuration to avoid possible setup problems due to
wireless uncertainty.