Asus P5BV/SAS - Manual (Page 131)

ASUS P5BV Series 5-33
5.3.2 Creating a RAID 1 set (mirror)
To create a RAID 1 set:
1. From the utility main menu, select 1. Create RAID Volume, then press
. This screen appears.
2. Enter a name for the RAID 1 set, then press .
3. When the RAID Level item is highlighted, press the up/down arrow key to
select RAID 1(Mirror), then press .
4 When the Disks item is highlighted, press to select the hard disk
drives to configure as RAID. The SELECT DISKS screen appears.
5 Use the up/down arrow key to highlight a drive, then press to
select. A small triangle marks the selected drive. Press after
completing your selection.
6. When the Capacity item is highlighted, key in the RAID volume capacity that
you want, then press . The default value indicates the maximum
allowed capacity.
7. Press when the Create Volume item is highlighted. This warning
message appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R
wRAID5
[ CREATE ARRAY MENU ]
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be
used
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-
Name:
RAID Level:
Disks:
Strip Size:
Volume1
RAID1(Mirror)
Select Disks
N/A
XX.X GB
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
8. Press to create the RAID volume and return to main menu or to go
back to Create Volume menu.