Asus P5BV/SAS - Manual (Page 129)

ASUS P5BV Series 5-31
5.3.1 Creating a RAID 0 set (stripe)
To create a RAID 0 set:
1. From the utility main menu, select 1. Create RAID Volume, then press
. This screen appears.
2. Enter a name for the RAID 0 set, then press .
3. When the RAID Level item is highlighted, press the up/down arrow key to
select RAID 0(Stripe), then press .
4. When the Disks item is highlighted, press to select the hard disk
drives to configure as RAID. This SELECT DISKS screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R
wRAID5
[ CREATE ARRAY MENU ]
[ DISK/VOLUME INFORMATION ]
Enter a string between 1 and 16 characters in length that can be
used
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-
Name:
RAID Level:
Disks:
Strip Size:
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
[ SELECT DISKS ]
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection
Port Drive Model Serial # Size
Status
0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-
RAID Disk
1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-
RAID Disk
5. Use the up/down arrow key to highlight a drive, then press to
select. A small triangle marks the selected drive. Press after
completing your selection.