Zanussi ZIT64X User Manual

Page 22

• The appliance becomes too hot (e.g. when, a

saucepan boils dry). Before you use the ap-
pliance again, the cooking zone must be
cool.

• You use incorrect cookware. The symbol

comes on and the cooking zone deactivates
automatically after 2 minutes.

• You do not deactivate a cooking zone or

change the heat setting. After some time
comes on and the appliance deactivates.
See below.

• The relation between heat setting and times

of the Automatic Switch Off function:

•

— 6 hours

•

— 5 hours

•

— 4 hours

•

— 1.5 hours

The heat setting

Touch

to increase the heat setting. Touch

to decrease the heat setting. The display

shows the heat setting. Touch

and

at the

same time to deactivate the cooking zone.

Power function

The Power function makes more power availa-
ble to the induction cooking zones. The Power
function can be activated for a limited period of
time ( see Technical Information chapter). After
that, the induction cooking zone automatically
sets back to highest heat setting. To activate,
touch

comes on. To deactivate, change

the heat setting.

Power management

The power management divides the power be-
tween two cooking zones in a pair (see the il-
lustration). The power function increases the
power to the maximum level for one cooking
zone in the pair. The power in the second cook-
ing zone automatically decreases. The heat set-
ting display for the reduced zone changes be-
tween two levels.

Timer

Count Down Timer

Use the Count Down Timer to set how long the
cooking zone operates for only this one time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after you
set the timer.

• To set the cooking zone: touch

again

and again until the indicator of a necessary
cooking zone comes on.

• To activate or change the Timer: touch

of the timer to set the time (

minutes). When the indicator of the

cooking zone starts to flash slow, the time
counts down.

• To deactivate the Timer: set the cooking

zone with

and touch

to deactivate the

Timer. The remaining time counts back to

. The indicator of the cooking zone goes out.

• To see the remaining time: set the cook-

ing zone with

. The indicator of the cook-

ing zone starts to flash quickly. The display
shows the remaining time.

When the time comes to an end, the sound op-
erates and

flashes. The cooking zone deac-

tivates.

• To stop the sound: touch

Minute Minder

You can use the Timer as a Minute Minder
while the cooking zones do not operate. Touch

. Touch

to set the time. When the

time comes to an end, the sound operates and

flashes

• To stop the sound: touch

www.zanussi.com