Media-Tech MASTER-MID GPS - Manual (Page 6)

6
EN
Language setting
Select “Language & keyboard”, then click “Select lan-
guage” and select desired system language.
Date setting
Go to “Settings/Date & time settings” and set manually
or mark option “Automatic” – date will be synchronized
automatically when tablet will logon to cell network (it
requires an active UMTS connection).
Wi-Fi connection
Go to “Settings/Wirelles & networks” and click “Wi-Fi”
to enable Wi-Fi card. Then click “Wi-Fi settings” to enter
next menu, then click “Add Wi-Fi network”. Enter pa-
rameters provided by your Wi-Fi network administrator.
Note! When you go out of reach of Wi-Fi network or
go to “Suspend mode” or “Power off mode” you will
be disconnected. Device will automatically estab-
lish connection when power on. If it does not, go to
“Wi-Fi settings” to uncheck and check again “Wi-Fi”
option to force establishing Wi-Fi connection.
UMTS connection
Power off device and then plug USB UMTS modem.
Power on the device. Go to “Wirelles & networking” set-
tings and turn off “Wi-Fi” connection and then turn on
“Mobile network” .
When connection is established under “Wi-Fi” option
there will be information “Connected to [name of net-
work]”. Also Wi-Fi network icon will be displayed on the
status bar.