SCANTECH ID (Champtek company) SG20 - Manual (Page 8)

Interface Manual Scantech SG-20 Discovery WLAN Rel 1.1 6
In the examples below, IP address 192.137.81.210 is used for the Discovery terminal
and the MAC address of the specific unit is: 00-20-4A-82-43-CB.
2 Entering the configuration menu through Telnet
2.1 Connect the Discovery, preferably with an Ethernet cross cable to your PC.
Start-up U-Start, the demo and configuration program, which you received on the
Discovery CD-ROM enclosed with the Discovery or by E-mail (Ustart.exe for
Windows). Non-windows users could follow the instructions described in Chapter 7.
MAJOR FEATURES OF U-START, the TCP/IP terminal:
- Ethernet/WLAN configuration of the Discovery
terminal
- Download your own images, icons and fonts
- Change the standard text messages
- Choose your own character size
- Select the scrolling of text messages and
images
- Demo with bar codes. See Appendix F in the
SG-20 User’ manual
- Down- and upload complete terminal
configurations
- Upload new firmware into the Discovery
- The Discovery control (ESC) commands are
displayed byte by byte on the U-start terminal
screen as a ‘live’ demo
2.2 Input the Ethernet address of your individual SG-20 terminal, also referred as the
unique hardware address or the MAC address. This can be found on a small label on
the back of the SG-20 Discovery, as well on the WLAN module inside the Discovery.
Format: e.g. 00-20-4a-82-43-cb.
2.3 Input a free IP address on your local network (contact your network manager). This is
used as a temporary IP address for the Discovery. In our example: 192.137.81.210: