Procom DFSA-4-tetra-bz-bbmu1 - Manual

DFSA 4/TETRA-BZ BBMU1
Dual-frequency shortened Mobile Antenna for the 4 m and
TETRA Bands
DESCRIPTION
External antenna whip mounted on the BZ-mount.
Stainless steel BZ-mount with ball-joint and wing screw
whip-fastening system.
Polyethylene-covered flexible whip.
Dual-frequency mobile antenna for the 4 m and TETRA bands with one
common output.
Easily removable whip for car wash.
BZP0.1-mount permanently attached 100 mm cable terminated with
FME-connector.
Matching unit (BBMU) with TNC female output connector included.
BZP0.1-MOUNT WITH 0.1 M FME RG 58
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
DFSA 4/TETRA-BZ BBMU1 130001586
SPECIFICATIONS
ELECTRICAL
MODEL DFSA 4/TETRA-BZ BBMU1
ANTENNA TYPE Dual-frequency shortened mobile antenna
FREQUENCY 4 m: 73 - 80 MHz
TETRA: 380 - 410 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 4 m: approx. -6 dB ±2 dB
TETRA: approx. 1 dB
(acc. to EIA RS-329-1)
SWR ≤ 1.9 in both bands
MAX. POWER 25 W
MECHANICAL
MATERIALS Whip:
Glass fibre whip with copper wire winding,
polyethylene-covered
Black-chromed brass
Mount:
Black-chromed brass
Weather- and shockproof plastics
Stainless steel
RECOMMENDED
INSTALLATION
TORQUE
7.5 ± 1 Nm
COLOUR Black
HEIGHT Approx. 670 mm
WEIGHT Approx. 150 g
DIMENSIONS Antenna: approx. 670 mm
Connecting cable: 100 mm RG 58 with FME-conn.
Matching unit: 50 x 50 x 20 mm
MOUNTING ø21 mm dia. hole
(For roof thicknesses 2 mm up to 7.5 mm
mounting hole should be ø22 mm dia.)
ROOF THICKNESS Max. 2.0 mm
(Models up to 7.5 mm on request)