Procom HX 30-KZ - Manual

HX 30-KZ
Very Short Helical Mobile Antenna for the 27 MHz CB-Band
DESCRIPTION
Ultra-short (0.03 λ) mobile antenna for short-distance communication.
Ideal where normal-sized antennas cannot be used, as on building-site
machines, forest vehicles etc.
Amazingly good performance despite a very low height, due to top
loading.
Stainless steel Z-mount with ball-joint and wing screw whip-fastening
system.
Simple mounting exclusively with access from the outside.
Models with roof thickness from 2 mm to 7.5 mm mounting from the
inside.
Ready-tuned and tested from the factory to assure minimum SWR.
Choice between two connection principles:
Z-mount: FME-connection (supplied without cable).
ZP4-mount: Permanently attached 4 m cable terminated with FME-
connector.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. MOUNT VERSION
HX 30-KZ 130000599 Z-mount with FME-system
HX 30-KZP4 130000600 ZP4-mount with 4 m cable
and FME connector
SPECIFICATIONS
ELECTRICAL
MODEL HX 30-KZ
ANTENNA TYPE Toploaded helical mobile antenna
FREQUENCY 27 MHz CB-band
IMPEDANCE Nom. 50 Ω
POLARISATION Vertical
BAND WIDTH ≥ 250 kHz @ SWR ≤ 2.0
SWR ≤ 1.3 @ f. res.
MAX. POWER 5 W
MECHANICAL
MATERIALS Whip:
Electroplated steel helix
moulded in elastomer
Chromed brass
Mount:
Chromed brass
Weather- and shockproof plastics
Stainless steel
RECOMMENDED
INSTALLATION TORQUE
7.5 ± 1 Nm
COLOUR Black
HEIGHT Approx. 34 cm
WEIGHT Approx. 330 g
MOUNTING ø21 mm dia. hole
(For roof thickness 2 mm up to 7.5 mm
mounting hole should be ø22 mm dia.)
ROOF THICKNESS Max. 2.0 mm
(Models up to 7.5 mm on request)