Procom MU 1-x-... - Manual

MU 1-X/...
Unity Gain ¼ λ Mobile Antenna for the 450 MHz Band
DESCRIPTION
Black-chromed stainless steel whip.
Type MU 1-X/s covers 370 – 410 MHz
Type MU 1-X/l covers 406 – 440 MHz
Type MU 1-X/h covers 430 – 470 MHz
– no tuning required.
Stainless steel X-mount with M6-thread whip-fastening system
Simple mounting exclusively with access from the outside.
Models available with X-mount (oblong), CX-mount (circular) and MM-
mount (magnetic).
Choice between two connection principles:
X-mount, MM-mount: FME-connection (supplied without cable).
XP4-mount: Permanently attached 4 m cable terminated with FME-
connector.
All whips are compatible with all mounts.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. FREQUENCY MOUNT VERSION
MU 1-X/s 130000866 370 - 410 MHz X-mount (oblong)
with FME-system
MU 1-X/l 130000858 406 - 440 MHz Same mount as above
MU 1-X/h 130000862 430 - 470 MHz Same mount as above
MU 1-CX/s 130000867 370 - 410 MHz CX-mount (circular)
with FME-system
MU 1-CX/l 130000861 406 - 440 MHz Same mount as above
MU 1-CX/h 130000859 430 - 470 MHz Same mount as above
MU 1-XP4/s 130000869 370 - 410 MHz XP4-mount (oblong)
with 4 m cable and
FME-connector
MU 1-XP4/l 130000855 406 - 440 MHz Same mount as above
MU 1-XP4/h 130000857 430 - 470 MHz Same mount as above
MU 1-CXP4/s 130000868 370 - 410 MHz CXP4-mount (circular)
with 4 m cable and
FME-connector
MU 1-CXP4/l 130000863 406 - 440 MHz Same mount as above
MU 1-CXP4/h 130000853 430 - 470 MHz Same mount as above
MU 1-MM/s 130000849 370 - 410 MHz MM-mount (magnetic)
with FME-system
MU 1-MM/l 130000850 406 - 440 MHz Same mount as above
MU 1-MM/h 130000851 430 - 470 MHz Same mount as above
SPECIFICATIONS
ELECTRICAL
MODEL MU 1-X/...
ANTENNA TYPE ¼ λ mobile whip antenna
FREQUENCY 450 MHz-band covered by three models
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 0 dB (acc. to EIA RS-329-1)
BANDWIDTH ≥ 45 MHz @ SWR ≤ 1.5
SWR ≤ 1.2 @ f. res.
MAX. POWER 100 W
MECHANICAL
MATERIALS Whip:
Stainless steel and black-chromed brass
Mount:
Black-chromed brass
Weather- and shockproof plastics
Stainless steel
RECOMMENDED
INSTALLATION
TORQUE
4 ± 1 Nm
COLOUR Black
HEIGHT Approx. 180 mm
WEIGHT X-version: Approx. 60 g
XP4-version: Approx. 200 g
MM-version: Approx. 268 g
MOUNTING 18 mm dia. hole