Universal Audio UAD Plug-Ins ver.7.5 - Manual (Page 311)

UAD Powered Plug-Ins Manual - 311 - Chapter 29: Ocean Way Studios
Gain This fader controls the volume level of the microphone. Gain has
a logarithmic taper for a more musical response. The gain range
is off to +12 dB. Gain is at unity when set to the zero position.
Tip: To quickly return to the 0 dB (unity) position, click the associ-
ated NEAR/MID/FAR text label beneath the fader, or the associ-
ated “0” text label at the fader’s unity gain position.
Master Controls
Predelay The amount of time between the dry signal and the onset of the
reverb is controlled with this knob. The range is from 0 to 125
milliseconds.
Predelay is cumulative with the inherent microphone delays.
Note: Predelay is unavailable in Re-Mic mode.
Bypass Bypass disables the plug-in. The button glows red when Ocean Way
Studios is disabled. Bypass can be used to compare the processed
and original signals.
Note: The UAD DSP load is not reduced when bypassed with this switch. To
reduce UAD DSP usage when bypassed, use the host’s bypass switch instead.
L/R Swap This switch reverses the left and right channels at the output of the
plug-in. L/R Swap is useful for changing the listener perspective from
the audience position to the performer position. When the switch is not
illuminated (the default), output is from the audience position.
Mono Ocean Way Studios can be used in a mono-in/mono-out,
mono-in/stereo out, or stereo-in/stereo-out configuration. The
left/right stereo outputs are summed to mono when the Mono switch is
engaged. When the plug-in is used in a mono-in/mono-out configuration, this
control is always engaged and the left/right output channels are summed.