The mastering compressor – Universal Audio SHADOW HILLS MASTERING COMPRESSOR User Manual

Page 8

Text mode
Original mode

The Mastering Compressor

The transformers connected to the audio boards and chassis must be shot through their cores,
and the windings unraveled, their lamination separated, bent, and scattered some distance
away. The audio boards should be crushed under heel, then folded or ripped, and then
incinerated according to the previously described method. The 8/32 screws that attach the
front panel chassis should be removed. The tube and meter glass should be smashed and the
meter pointers broken off. The panel should be bent or folded, and then placed inside the
chassis and either buried at least six feet deep, or exploded by a grenade or other means.

Your cooperation is greatly appreciated.