Aqua-Pure NWS200 - Manual (Page 9)

SECTION 2: INSTALLATION
Proper installation sequence of water conditioning equipment is very important. Refer to the following diagram for your particular water supply. Failure to follow installation,
operation, and maintenance instructions may result in property damage due to leakage and will void warranty.
Public Water Supply Installation
Typical Private Well Installation
BRINE
TANK
WATER
SOFTENER
FILTER
(OPTIONAL)
SOFT WATER
TANK
SWITCH
PRESSURE
PRESSURE
WELL
WATER
INCOMING
FILTERED WATER
FILTERED
CHECK VALVE
BRINE
TANK
WATER
SOFTENER
FILTER
(OPTIONAL)
SOFT WATER
INCOMING
WATER
FILTERED WATER
FILTERED
CHECK VALVE
W
ASTE DRAIN
W
ASTE DRAIN
CAUTION
To reduce the risk associated with property damage due to water leakage:
• Read and follow Use instructions before installation and use of this water treatment system.
• Installation and use MUST comply with existing state or local plumbing codes.
To reduce the risk associated with property damage due to plugged water lines:
• Pay particular attention to correct orientation of control valve. Water fl ow should match arrow on control valve. The Inlet and Outlet of other water treatment
equipment products will vary depending on the control valve brand used.
Figure 1
2-1