SENA Parani-SD200L - Manual (Page 20)

20
Figure 3-8 Signal Strength Test
The signal strength test shows LInkQuality and RSSI values. The closer LinkQuality is to 255 and
RSSI is to 0, this means the Parani-SD200L has a good connection to the connected Bluetooth device.
In general, the wireless connectivity is at its best within 10 meters. You can push the STOP button at
anytime in order to terminate the signal strength test. The signal strength test will continue until the
STOP button is pushed. If you close the ParaniWIN Window without pushing the STOP button, you
must restart Parani-SD200L to terminate the test.
Connection(in) icon will show the following window, which enables the Parani-SD200L to wait for a
connection from another Bluetooth device. If the waiting time is set to 0, Parani -SD200L will
continually wait for connection until [Cancel] button is clicked.