Pfister GT72-M1SS User Manual

Page 2

Thank you for purchasing this Price Pﬁster Bar Faucet. All Price Pﬁster products are carefully engineered and factory tested to provide long trouble-free use under normal
conditions. This Bar Faucet is easy to install using basic tools and our easy to follow illustrated instructions. If you have any questions regarding your Bar Faucet installation,
call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding.

Price Pﬁster recommends calling a professional if you are uncertain about
installing this product!

This product should be installed in accordance with all local and state plumbing and
building codes.

2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found under the sink or near the water meter. If you are replacing an
existing faucet, remove the faucet from the sink and clean the sink surface
thoroughly.

3 TOOLS RECOMMENDED

• PTFE plumber's tape or thread sealant

• Plumber's putty

• Slotted screwdriver • Pliers

• Adjustable wrench

• Flashlight

• Cloth

Your installation may require supply lines and/or shut-off valves, cone washers,
friction rings, or other additional tools. Consult the store where your faucet was
purchased for recommended connections that may be required for you area.

4 INSTALLING DECKPLATE
Ensure that the Plastic Putty Plate (4A) is pressed on the Deckplate (4B). Place
a bead of plumber’s putty in the groove along the outer edge of the Putty Plate
(4A). Install the Deckplate (4B) over the holes in your sink.

5 FAUCET INSTALLATION
With the spout facing forward, carefully install the Faucet Supply Hoses (5A)
through the center hole of Deckplate (5B). Make sure that the Flats (5C) on the
Faucet Body (5D) are aligned with the Flats (5E) on the Deckplate (5B).

DECKPLATE INSTALLATION

SINGLE POST INSTALLATION

6 INSTALLING MOUNTING RING
Place Mounting Ring (6A) over Plastic Seal (6B) and sink hole. Align Mounting
Ring (6A) to the center of sink hole.

FAUCET INSTALLATION STEPS

Go To Step 8

STOP

ENGLISH

INSTALLATION:
Your faucet can be installed with or without the deck plate:

For installation using the deck plate:

Go To Step 4

For installation using the single post:

Go To Step 6

BOTTOM GROOVE