beautypg.com

Factory Direct Hardware Hansgrohe 27410001 Raindance User Manual

Page 6

background image

6

27410001 Installation Instructions

Position the mounting piece over the nipple. Mark the

positions for four screw holes. Put the mounting piece in

a safe place.

Drill the screw holes with a 6 mm drill bit suitable for the

wall surface (1,2). Install the anchors (3). Seal the wall

around the anchors with a waterproof bathroom sealant.

Seal the wall around the nipple with a waterproof ba-

throom sealant (1). Wrap the threads on the nipple with

Teflon

®

thread tape (2). Install the mounting piece with a

17 mm wrench (3).

Caution: do not drill into water line!

The showerhead and arm assembly weighs

approximately 20 lbs. The enclosed mounting

hardware is suitable for a solid surface only.