Factory Direct Hardware Houzer CTG-3200 - Manual (Page 2)

INSTALLATION INSTRUCTIONS
Please carefully read complete instructions before beginning installation.
Note: These instructions are for installation with solid surface, composite material countertops.
Houzer recommends professional countertop installers and is not responsible for damages to the
countertop or sink during installation.
1. Unpack the new sink and check the contents of the materials supplied: (1) Sink, (12) Mounting
brackets, (1) Cutout template.
2. Supplied cutout template provides three options of installation:
A. Flush mount: Sink edge is flush with countertop opening. (Figure 1)
B. Reveal mount: Sink rim is exposed approximately 1/4" from the edge of countertop opening.
(Figure 2)
C. Recess mount: Sink rim is recessed approximately 1/8" from the edge of countertop opening.
Cut countertop approximately 1/8" inside of flush mount cut line. (Figure 3)
Figure 1 Figure 2 Figure 3
3. Cut out the appropriate template for your sink model and desired installation option. Place
template in desired position on countertop, locating center of the bowl over cabinet and faucet holes.
4. Trace the outline of the template and cut countertop along the inside of the line using appropriate
cutting tools. Template is for guide only. Use physical sink to ensure accurate cutout opening.
2
COUNTERTOP
SILICONE CAULK
(NOT FURNISHED)
SINK MOUNTING
BRACKET
FASTENER
COUNTERTOP
SILICONE CAULK
(NOT FURNISHED)
SINK MOUNTING
BRACKET
FASTENER
COUNTERTOP
SILICONE CAULK
(NOT FURNISHED)
SINK MOUNTING
BRACKET
FASTENER