Bracket mounting cont, Installing the back cover – PolyPlanar RD44 User Manual
Page 6
1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel (410) 761-4000
www.polyplanar.com
6
Bracket Mounting
cont.
Dash Mount
Overhead mount
Screw
Bracket
Captured nut detail
Installing the Back Cover
A short (10mm) M5 screw holds the back panel assembly to the body
of the RD-44. Remove the back panel and insert the 8mm hex nuts
supplied into the retaining slots as shown above in the detail. .
Use the 8mm screws and the cover plate provided to attach the
bracket to the rear housing. The rear housing can be rotated 180° for
dash or overhead mounting.
Use the 5mm short screw to attach the rear housing to the RD-44
body.