beautypg.com

Megavox pro public address system owners manual – Anchor Audio MegaVox Pro Public Address System User Manual

Page 3

background image

MADE IN USA

SIX YEAR WARRANTY

MegaVox Pro Public Address System Owners Manual

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

3

CONTROLLING FEEDBACK
Feedback, a howling noise or shrill sound, is self-generated by the sound system. It’s caused by
a microphone picking up the sound coming from the speaker and then re-amplifying it. Once a
feedback loop starts, it continues until the system is adjusted.

FEEDBACK CAUSES

• Microphone too close, pointing towards

or in front of speaker

• Volume setting is too loud for room
• Sound reflecting off hard surfaces


AVOIDING & ELIMINATING FEEDBACK

• Point microphone in a different direction
• Keep microphone away from the speaker
• Place speaker in FRONT of the microphone
• Reduce the sound system volume levels

CAUTION: Feedback can damage your equipment & may be hazardous to hearing.

CORRECT SYSTEM PLACEMENT

WRONG SYSTEM PLACEMENT

CONNECTING TWO OR MORE MEGAVOX PRO PA SYSTEMS

UNPOWERED MEGAVOX PRO COMPANION SPEAKER

(MEGA-6001)

Connect one end of a speaker cable

(SC-50) to the SPKR OUT jack on the back of a

powered MegaVox PRO PA system.
The other end connects to the jack labeled IN on the back of a MegaVox PRO
unpowered companion speaker.

NOTE: AC power is not required for an unpowered companion speaker.

POWERED MEGAVOX PRO PA SYSTEMS WITH LINE OUT
Connect speaker cable

(SC-50) from LINE OUT on first powered MegaVox PRO to

LINE IN on second powered MegaVox PRO. Set volume level of the second system to
maximum, this gives full volume control to the first or primary PA system.

DAISY-CHAINING
Use the Line Out method above to connect up to six powered MegaVox PRO PA
Systems. Make all connections with power off.
Set volume level to maximum on all secondary systems so the primary unit Level
Control sets the volume for the entire chain.
To avoid speaker popping, which can cause damage, power speakers on in order,
primary unit first, and power speakers off in reverse order, primary unit last.

FIRST POWERED MEGAVOX PRO

SECOND POWERED

MEGAVOX PRO

EX-50PP CABLE