Anchor Audio Seville Lectern - Manual (Page 6)

MADE IN USA
SIX YEAR WARRANTY
Seville Lectern Sound System Owners Manual
Visit Our Website: www.anchoraudio.com
SEVILLE TECHNICAL SPECIFICATIONS
Anchor Audio customer service
800.262.4671
For AdditionAL inFormAtion
visit www.anchoraudio.com
6
NEED MORE HELP? Acclaim Portable Lectern Setup & Operation Videos!
Visit Our Website: www.anchoraudio.com
(Specifications Subject to Change Without Notice)
Rated Power Output 20 Watts
Max SPL @ Rated Power 113 dB @ 1 meter
Frequency Response
65 Hz – 15 KHz
AC Power Reqs. 110 – 125 V AC, 50/60 Hz
210 – 240 V AC, 50/60 Hz
(40 VA nominal, 120 VA max)
Speaker Type 6.5” woofer, high-output tweeter
Dimensions (HWD) 49” x 24” x 21”
(125 x 61 x 53 cm)
Weight 122 lbs/ 55 Kg
Inputs
Lectern Microphone
Lo-Z, balanced, phantom power,
XLR
Auxiliary Microphone
Lo-Z, unbalanced, 1/4”-phone
Aux Hi-Z, unbalanced, 1/4”-phone
Sensitivity For Rated Output
Microphone
-52 dBV (2.5 mVrms)
Line -14 dBV (200 mVrms)
Outputs
Line (post fader)
buffer isolated, 1/4” phone
HAVING TROUBLE WITH YOUR WIRELESS SYSTEM?
(WIRELESS MODELS ONLY)
CONDITION POSSIBLE SOLUTION
No Sound (RX Indicator: ON) • set POWER switch to RED position (handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into body pack transmitter
No Sound (RX Indicator: OFF) • turn SEVILLE POWER switch on
• make sure transmitter power switch is on
• set receiver and transmitter to same channel
• replace battery in transmitter