Anchor Audio Seville Lectern - Manual (Page 2)

MADE IN USA
SIX YEAR WARRANTY
Seville Lectern Sound System Owners Manual
Visit Our Website: www.anchoraudio.com
2
SEVILLE LECTERN CONTROL PANEL - LP7500U2
BASIC SYSTEM OPERATION
NOTE: Elevate lectern when possible to project sound
over listeners in front.
1. Position lectern in front of and facing the audience
2. Plug gooseneck/mic into the XLR jack located on the
lectern top
3. Adjust microphone position
4. Set the Lectern Mic Volume to minimum
5. Plug the system power cord into a standard AC outlet
6. Turn system Power Switch ON - the Power LED should
light
7. Speak into microphone and adjust the lectern mic control
to desired volume level
POWER SWITCH MIC INPUT AUX INPUT
LINE OUT
AUXILIARY
VOLUME
WIRED
MIC
VOLUME
LECTERN MIC
VOLUME
READING LIGHT SWITCH
POWER LED
fuse
WARNING: Electric shock hazard. Do not remove cover. Contact
Anchor Audio for repair/service. To reduce risk of fire or electric
shock, do not expose this equipment to rain or moisture.
CAUTION: For use indoors and in dry, nonhazardous locations ONLY.
FUSE REPLACEMENT:
For continued protection
against risk of fire, replace with
same type and rating fuse only.
35W/Single Phase.
OFF
ON
BRIGHT - OFF - DIM
READING LIGHT
VOLUME
LECTERN
MIC VOLUME
AUX
VOLUME
WIRED MIC
VOLUME
WIRELESS 1
MIC INPUT AUX IN LINE OUT
WIRELESS 2 VOLUME
RX
RX
RX
RX
MADE IN THE USA
Anchor Audio, Inc.
800/ANCHOR1
www.anchoraudio.com
WIRELESS 2
VOLUME CONTROL
WIRELESS
1 CHANNEL
SELECTION WIRELESS 1
VOLUME CONTROL
WIRELESS 2 CHANNEL
SELECTION
CARING FOR THE SEVILLE
Taking proper care of your new lectern will give you
years of use. Clean the solid wood trim with an
oil-based furniture polish, and the laminate surfaces
with common household polish.