Factory Direct Hardware Hansgrohe 06438 - Manual (Page 3)

3
Push the elbow firmly over one end of the handshower
hose (1). Tighten the hose nut ().
From the top, thread the hose through the handshower
holder escutcheon and handshower holder (1). Snap the
two halves of the hose insert around the hose (). Press
the hose insert down into the holder. Install the escutch-
eon (3).
Seal the threads on the inlet end of the high pressure
hose with Teflon tape. Install this end of the hose to the
outlet on the mixing valve.
Connect the handshower hose to the high pressure hose.