beautypg.com

Factory Direct Hardware Hansgrohe 38020 User Manual

Page 3

background image

3

Installation

Place the faucet and sealing ring on the mounting

surface.
Install the friction washer, metal washer, and mounting

nut.
Tighten the mounting nut by hand.
Check the position of the faucet. When satisfied, use

a slot-headed screwdriver to tighten the tensioning

screws.

Connect the hot and cold supply lines to the stops.

Use two wrenches, as shown in the

diagram, to prevent hose twisting.

Install the drain.
Set the high temperature limit stop (optional).
Turn on the water and check all connections for leaks.

Install the drain pull

rod.

This manual is related to the following products: