beautypg.com

Factory Direct Hardware Hansgrohe 39451 Axor Citterio User Manual

Page 3

background image

3

Technical Data

Operating pressure:

max. 147 psi

Recommended operating pressure:

15 - 7 psi

Hot water temperature:

max. 176° F*

Recommended hot water temp.:

10° F - 140° F*

Flow rate at 44 psi:

approx. 5.8 gpm

Requires rough 1045181 (not included)

Hansgrohe single lever mixers can be used together with hydraulically and thermically controlled

continuous flow heaters if the flow pressure is at least 15 psi.

*Know and follow all applicable local plumbing codes when setting the temperature on the water heater. In

Massachusetts, the water heater may be set no higher than 11° F.

Installation

Turn the water off at the main before beginning!

Cut the plaster shield so that it extends 3/8”

above the surface of the finished floor.

Remove the flush housing screws with an 8 mm

Allen wrench (not included). Remove the flush

housing. Do not discard the screws!