Factory Direct Hardware Delta 1601T9006 - Manual (Page 3)

Specification Drawing #17
Note: Measurements may vary ± 6mm (0.25'')
1600T and 1601T SERIES
1600T and 1601T SERIES
✔
PRODUCT NO. VALVE TYPE MOUNT TYPE COVER
1600T 6 0 2 Flushvalve w/Access Panel Box Recessed Mount 356 x 508mm (14 x 20") Stainless Steel
1600T 6 0 3 Flushvalve w/Access Panel Box Recessed Mount 356mm (14") Stainless Steel
*1600T 6 0 4 Flushvalve less Access Panel Box Recessed Mount 124mm (4-7/8") Stainless Steel
1601T 6 0 2 Flushvalve w/Access Panel Box Recessed Mount 356 x 508mm (14 x 20") Stainless Steel
1601T 6 0 3 Flushvalve w/Access Panel Box Recessed Mount 356mm (14") Stainless Steel
*1601T 6 0 4 Flushvalve less Access Panel Box Recessed Mount 124mm (4-7/8") Stainless Steel
*This product is supplied with the Small Sensor Box. Note: Rough-in and Trim Ordered Separately
CONCEALED FLUSHVALVE INSTALLATION (RECESSED MOUNT)
Product supplied as shown by Solid Lines.
All items shown by Dotted Lines Supplied by Others.
SMALL SENSOR BOX SUPPLIED ONLY ON 1600T6_04 and 1601T6_04
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP-1600T6 Rev. B
305mm (12")
Square Frame
Flushvalve
Access
Box Frame
356mm (14")
Square
Stainless
Steel Cover
Sensor
Tubing, Elbow, Wall
and Spud Flange,
Spud Nut, etc.
Supplied as Required
for Fixture Specified.
Small Sensor Box
124mm
(4 1/2")
124mm
(4 1/2")
Stainless Steel Coverplate
Plaster
Guard
55mm
(2 5/32")
Finished Wall
Sensor
102mm
(4")
6mm
(1/4") min.
35mm
(1 3/5") max.
Standard Electrical Box
102 x 102mm (4" x 4" )
Vandal Proof
Screws (4)
** 356MM (14") Square S/S
Cover and 305mm (12")
Square Frame. SUPPLIED
ONLY ON 1600T6_03 and
1601T6_03
OR
** 356 x 508MM (14 x 20") S/S
Cover and 305 x 457mm (12 x
18") Frame. SUPPLIED ONLY
ON 1600T6_02 and 1601T6_02
Wheel
Handle
Stop
Flush Valve
121mm
(4 3/4")
305mm
(12") Square
305mm (12")
Square
Access
Box Frame
1" I.P. Inlet Outlet Parts
Tubing, Elbow,
Wall and Spud
Flange, Spud
Nut, etc.
Supplied as
Required for
Fixture Specified.
Except for:
3/4" and 1 1/4" Top
Inlet Urinal Fixtures
Where Exposed
Tubing, Flanges,
Elbow, etc.
(Supplied by Others.)
TECK ®
COMMERCIAL