beautypg.com

Factory Direct Hardware Hansgrohe 10175001 User Manual

Page 9

background image

Clean the aerator and filters -- all models

If the water flow is reduced over time, clean the aerator

(a) and the filters (b).

Turn the water supplies off (1). Disconnect the power

cable ().

Starck 10101/10106/10140/10145 -- unscrew and

remove the aerator (a).

Starck X 10170/10175/10180/10185 -- remove the

spray former (a), using a mm Allen wrench to loosen

the screws. Do not lose the screws!

All models -- disconnect the hot and cold supply hoses from the adapters. Remove the filters (b).

At another sink, rinse the filters and the aerator or spray former.

Reinstall the aerator or spray former.

Replace the filters. Reconnect the hot and cold supply hoses (see page 4).

This manual is related to the following products: