beautypg.com

Factory Direct Hardware Hansgrohe 10402001 Axor Starck X User Manual

Page 2

background image

2

Starck Tub Filler

10402XX1

Technical Specification

Maximum incoming water pressure

145 psi

Recommended water pressure

14.5 - 72 psi

Recommended max. incoming hot water temp.

120

o

F - 140

o

F*

Flow rate of tub filler @ 45 psi

5.75 gpm

Flow rate of handshower

2.5 gpm

Backflow prevention furnished by check valve in the handspray outlet and automatically

closing diverter

Installation Considerations

This unit requires 2 1/2" female fittings, located 5 7/8" apart on center (+/- 5/8"),

recessed 3/8" behind the surface of the finished wall.

This unit is not anti-scald. If anti-scald is required by local plumbing code, or is

desired, install this unit with a remote pressure balance valve, such as Hansgrohe

13418181 or similar unit.