Factory Direct Hardware Hansgrohe 18440001 Axor Massaud - Manual (Page 5)

5
Pull the Secuflex hose completely out of the holder, to
expose the high pressure hose. Separate the Secuflex
hose from the high pressure hose by unscrewing the
nut (1).
Remove the plug () from the high pressure hose.
Install the check valve (3). The arrow should point in
the direction of the water flow. Attach the handshow-
er hose to the high pressure hose (4).
Lubricate the handshower hose and the ends of the Secu-
flex hose with the silicon lubricant.
Push the handshower hose up through the Secuflex hose
(1). Push the end of the Secuflex hose over the high
pressure hose and tighten the nut (). Remove the plaster
shield (3).