beautypg.com

Factory Direct Hardware Hansgrohe 10111 User Manual

Page 3

background image

3

Installation Instructions

Sit the faucet with black sealing ring in the faucet hole on top of the

mounting surface.

From beneath, install the friction washer, metal washer, and mounting

nut. Tighten the mounting nut, taking care not to overtighten.

Check the position of the faucet. When satisfied, use a slot-headed

screwdriver to tighten the tensioning screws.

Feed the pull rod through the hole in the back of the faucet body.

Attach the supply lines to the supply stops with standard 3/8"

compression fittings (not included)

This manual is related to the following products: