Factory Direct Hardware Hansgrohe 10111 - Manual (Page 2)

2
Starck single control lavatory faucet
10111XX1
Starck tall single control lavatory faucet
10120XX1
Starck single control bidet faucet
10211XX1
Technical Specification
Maximum water pressure 145 psi
Recommended water pressure 14.5 - 72 psi
Maximum hot water temp. 176 o *
Recommended hot water temp 120 o - 140 o *
Max. flow rate @ 45 psi 2.2 gpm
Max. deck thickness 1 3/8”
Hole size in deck 1 3/8”
Installation considerations:
The supply hoses installed on this unit connect
to the supply stops with standard 3/8”
compression fittings. Supply stops and 3/8”
compression fittings are not included.
*Many municipalities require that the water heater be set
no higher than 120 o . Please know and follow all
applicable plumbing codes when setting the temperature on
the water heater.