Disk boot function, Password management – ADATA Classic PD18 User Manual
Page 8
2. Adjust the Slider Control Bar to you wish “security size” and “public size”
3. Click partition button then the tool will divide disk into 2 partitions. If you don’t
need a security zone, you can skip this step.
The default password of security zone is “0000”
Warrning!! Run Partition function will erase all data on the disk!!
Disk Boot Function
1. Only Windows98 and WindowsME can establish Boot function.
2. Please check the Boot type you want to set.
3. If you choose USB-ZIP, you will have to change the Boot-up setting to
USB-ZIP in your BIOS. After successfully booting, the prompt mark will be
A:\>
4. If you choose USB-HDD, you will have to change the Boot-up setting to
USB-HDD in your BIOS. After successfully booting, the prompt mark will
be C:\>
Password Management