Cable retention to the unit – Neutrik NPP-TB PATCH PANEL “Easy Patch” | 48 TB Jack User Manual
Page 6

Page 6 of 11
NPP-TB Instruction Manual
4. Cable retention to the unit
The cable retention is at the back of the one piece metal housing. Simply put the cable onto
the prismatic bar and attach it with cable ties as shown in the drawing.
For large or thick bundles there is a rear extension bar (NPP-S) available as an option.
It can be attached with four screws to the main housing. The cable is attached to the bar in
the same manner as the standard version.