Quick start guide – Xoro HSD 8450 User Manual
Page 62
10
HSD 8450
Engl
ish
Quick Start Guide
1.
Connect the power adapter (supplied with the player) to the side input and to a wall
outlet.
2. Press
the
POWER button (Please refer No. 1).
3. Press
the
OPEN/CLOSE button (Please refer No. 6).
4.
Inserting a DVD disc (Please refer No. 2 - Disc Loader). Align the center of the DVD
disc with the center of the disc guide.
5.
Then press the OPEN/CLOSE button again (Please refer No. 6).
6.
In general, the DVD already inserted into the player will start reading automatically.
If not, press the PLAY button (Please refer No. 8).
7.
When you want to stop, press the STOP button (Please refer No. 9).
8.
If you want to playback content from USB flash storage, please put the USB flash
storage into the USB plug (No. 5) of the DVD player. In case of a plugged USB
storage and no disc in the loader, the DVD-Player changes automatically to the USB
port. If not, please press the DVD/USB/CARD button on the remote control or on the
device (No. 7). If you want to playback some content from the card reader (SD, MMc
or MS card) than press again the DVD/USB/CARD button, when a disc and an USD
storages is conntected.
9.
To power off the unit, press the POWER button on the remote control. The device
goes into Stand.By mode.
10.
To power off completly the device, please press the POWER button (Please refer
No. 1).
1.
2.
3.
4.
5.
6.
7.
8. 9.