Function keys and display elements – 3B Scientific Light Therapy__3B Laser Pen 200 mW, 808 nm; infrared User Manual
Page 21
21
Last revised 2012-05-08
1 LASER
The laser is activated/deactivated with this key.
2 + / -
The values selected with the SET key can be changed with these keys.
3 SET
The values can be selected and stored with this key.
4 POWER
The 3B LASER PEN 200 mW is switched on and off with this key.
5 Display
The selected laser power level, operation mode, point search mode, therapy time, and
dose rate as well as information about the battery charge are shown on the display screen.
6 LED
This LED above the LASER key indicates whether the laser has been activated. An error in
the laser diode operation is indicated by a red light. When this happens, please contact
our technical service.
7 Battery compartment
Battery compartment Is at the bottom of the housing.
8 Red connector
Red connector Connector for the key pin
9 Charging contacts
Charging contacts for the charging station
10 Black connector
Connector for storing the key pin
11 Contact surface
For the point search
12 waveguide
Laser beam outlet
13 Charging station with
power supply unit
For charging the batteries
12
6
1
3
2
4
5
8/9/10
13
11
7
Function Keys and Display Elements