3B Scientific Heat Pump D (115 V, 60 Hz) User Manual
Page 2
2
•
Always keep the heat pump in an upright posi-
tion during storage, transport and operation.
•
Make sure you let the equipment stand upright for
at least 7 h before initial use if it was tipped over.
2. Components
Fig. 1
Components of the heat pump
1 Compressor
2 On/off
switch
for compressor
3 Water reservoir around condenser
4 Condenser
coil
5 Stirrer for condenser
6 Viewing
window
in
condenser
7 Overpressure cut-out switch
8 Reset
switch
9 Carrying
handles
10 Manometer for the high-pressure side
11 Manometer for the low-pressure side
12 Energy monitor
13 Expansion valve
14 Stirrer for evaporator
15 Evaporator coil
16 Water reservoir around evaporator
17 Viewing window in evaporator
Mains connection (on the backside)
Thermometer
Holder for thermometer