dbx 376 - Manual (Page 18)

Analog Applications
®
376 User Manual 10
Section 2
376
3). Enable the record function of the specific track of the recorder and open the specific tape
track return in the console which corresponds to the track to which the 376 is connected. As
you increase the setting of the DRIVE control, you should begin to hear the input of the 376
running through the recorder and returning to your console as a tape return.
4). Use the Parametric EQ LOW, MID, MID-FREQUENCY and HIGH controls to achieve the
desired EQ settings of the 376.
5). With signal passing through the unit, make the desired settings to the THRESHOLD,
RATIO, OVEREASY and SLOW controls of the Compressor section of the 376.
6). If you are using the 376 for a Vocal Application, make the desired settings to the FRE-
QUENCY and AMOUNT c ontrols of the De-Esser section of the 376.