Derale Performance 60 Amp Dual Relay Wire Harness Kit - Manual

16765-InstructionSheet
INSTALLATION INSTRUCTIONS
DUAL ELECTRIC FAN RELAY HARNESS
PART # 16765
Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com
Please read these instructions completely before beginning installation
RED Wire -
BLACK Wire -
ORANGE Wire -
YELLOW Wire -
GREEN Wire* -
Attach to the Positive (+) Terminal of Battery
Attach to a good Chassis ground (-)
Attach to the Positive Electric Fan Lead (Fan +)
Attach to 12V (+) Switched Power (Thermostat or
Manual Switch)
(OPTIONAL) Attach to the Positive feed from the A/C
Clutch
*This wire will allow you to turn on the Electric Fan every
time the vehicles air conditioning is turned on. If you do not
wish to use this option, please disregard the Green wire.
Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on
vehicles. Always use eye protection (goggles, safety glasses or shield). Park the vehicle in a well lit area, on level ground and apply the
parking brake. Only work on a cold vehicle that has been sitting overnight, failure to do so will result in severe burns and injury. Before starting
the vehicle, make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.
Failure to follow instructions can lead to severe damage and personal injury.
RELAY
#1
Mounting
Surface
RELAY
#2
Diagram #2
Diagram #3
87
87A
30
86 85
Orange
Fan (+)
Green/
Yellow
12V (+)
Switched
Power
Red
Battery (+)
Black
Ground (-)
Relay
Red
Orange
Yellow
Black
Green
To Positive (+) side of battery
To 12V (+) Switched Power
To Chassis Ground (-)
To A/C Clutch (+) Optional
Blue Wire (+) Black Wire (-)
To chassis ground (-)
Relay
#1
Red
Orange
Yellow
Black
Green
To Positive (+) side of battery
To 12V (+) Switched Power
To Chassis Ground (-)
To A/C Clutch (+) Optional
Blue Wire (+) Black Wire (-)
To chassis ground (-)
Diagram #1
30amp Fuse
Red Wire
Battery Power
12V (+)
Black Wire
Chassis Ground (-)
Green Wire
Optional A/C
Override (+)
One Way Diode
Orange Wire
Positive (+)
Fan Lead
Yellow Wire
to 12V (+)
Switched Power
KIT CONTENTS
QTY. DESCRIPTION
2 Relay Wire Harness
2 40/60 Amp Relay
TOOLS NEEDED
Wire Stripper
Crimping Tool
IMPORTANT
Each Relay will control up to two different fans with a
COMBINED MAXIMUM DRAW OF 25 CONTINUOUS AMPS.
Relay
#2
Electric Fan
#1
Electric Fan
#2