R&M Materials Handling ELECTRIC CHAIN HOISTS LoadMate Chain Hoist General Operation Manual - Manual (Page 24)

Electric Chain Hoist Operator’s Manual/EN/11.30.10
23/41
This document and the information contained herein, is the exclusive property of R&M MATERIALS HANDLING, INC. and represents a non-public, confidential and proprietary trade
secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M MATERIALS
HANDLING, INC. . Copyright © (2010) R&M MATERIALS HANDLING, INC. . All rights reserved.
Figure 10. Pushbutton Label Symbols
Columns A, B, C, and D represent sets of symbols. In order to meet local requirements, the purchaser specifies
a particular set of symbols.
Rows 1, 2, and 3 represent the pairs of buttons for a particular button. For example, row 1 represents the pair of
buttons for the hoisting motion, row 2 represents the pair of buttons for the trolley motion (optional), and row 3
represents the pair of buttons for the bridge motion (optional).
The control enclosure assembly will vary in the total number of buttons depending on the motions controlled.