Prokit's Industries MT-1505 - Manual (Page 8)

7
 Sensing: Average sensing
 Overload Protection: 600V dc and V ac rms
 Low Battery: Below approx. 2.4 V
 Power Supply: 3 V standard button battery x 1
(IEC-CR2032)
 Power Consumption (typical): 1.2 mA
 APO Consumption (typical): 2.0 μA
 APO Timing: Idle for 10 minutes
 Dimension / Weight: L115 mm x W 57 mm x H 12
mm / Approx. 75gm
(2) Special Features Auto-Select (Automatic V and Ω
selection) and Electric Field Detection
Safety: Meets IEC61010-1(2001),CAT II 600 V and CAT III
300V, Pollution Degree 2, Class 2
E.M.C. Meets EN61326 (2006), EN61000- 3-2 (2000), and
EN61000-3-3 (1995+A1:2001). CE Marking. However,
electrical noise or intense electromagnetic fields in the
vicinity of the equipment may disturb the measurement
circuit.
Measuring instruments will also respond to unwanted
signals that may be present within the measurement circuit.
Users should exercise care and take appropriate
precautions to avoid misleading results when making
measurements in the presence of electronic interference.
(3) Electrical Specifications (Accuracy @ 23 °C +/- 5 °C and
< 75% R.H.)